Proceedings of the Second SIMS EUROSIM Conference on Modelling and Simulation, SIMS EUROSIM 2024

Articles

• Renewable Energy Resource Risk Quantification and Mitigation Assessment for Mining Micro-Grid

  Moksadur Rahman, Stefan Thorburn

  001-009

  • PDF

• Evaluation of environmental and economic impact of wind turbine blade manufacture at life-cycle level

  Mohammed Taha, Stavros Vouros, Konstantinos Kyprianidis

  010-017

  • PDF

• Dynamic simulation models in the planning of experiments for control development

  Esko Juuso, Luis J. Yebra

  018-024

  • PDF

• Experimental and Numerical Testing of a Multi-Modular Floating Structure with Varying Connection Stiffness

  Trine Aas-Hansen, Vegard Njøten Fagerbakke, Trygve Kristiansen, Svein Sævik, Dong Trong Nguyen

  025-033

  • PDF

• Life Cycle Assessment of Floating Offshore Wind Farms: The Case of Hywind Tampen in Norway

  Omid Lotfizadeh, Zahir Barahmand, Hadi Amlashi

  033-040

  • PDF

• Computationally Efficient Optimization of Long Term Energy Storage Using Machine Learning

  Simon Karlsson, Stavros Vouros, Kristian Sandström, Konstantinos Kyprianidis

  041-047

  • PDF

• Battery model for transportation and stationary applications

  Erik Dahlquist, Maher Azaza, Masoume Shabani, Josefin Rojas Vasquez, Meysam Majidi Nezhad , Anas Fattouh, Amare Desalegn Fentaye

  048-056

  • PDF

• Numerical simulation of thermal runaway kinetic mechanisms and battery thermal model for safety assessment of different lithium-ion battery chemistries

  Sadegh Mehranfar, Amin Mahmoudzadeh Andwari, Juho Könnö, Antonio Garcia Martinez, Carlos Mico Reche

  057-062

  • PDF

• Wind power and battery storage enhance Sweden's grid flexibility and resilience

  Jordy Jorritsma, Stavros Vouros, Konstantinos Kyprianidis, Klaus Hubacek

  063-070

  • PDF

• CFD validation of optimized compact heat exchanger designs

  Johan Espelund, Geir Skaugen

  071-078

  • PDF

• Simulation of ammonia cracker process with Aspen HYSYS

  Per Morten Hansen, Chinthaka Attanayake, Vahid Farrokhi, Mohsen Gholizadefalah, Ladan Samaei, Zahra Sanidanesh, Lars Erik Øi

  079-084

  • PDF

• Steady State and Transient Modelling of A Three-Core Once-Through Steam Generator

  Håvard Falch, Geir Skaugen

  085-092

  • PDF

• A comparative study of conventional lime kilns and plasma calcination: Techno-economic assessment and decarbonization potential

  Maximilian Dylong, Moksadur Rahman

  093-097

  • PDF

• Assessment of Data Driven Techniques for Flow Rate Estimation in sub sea oil production

  Neville Aloysius D'Souza, Carlos Pfeiffer, Gaurav Mirlekar

  098-105

  • PDF

• Simulation and Cost Estimation of CO2 Capture with alternatives for doubled capacity

  Lars Erik Øi, Masoumeh Dehghanizadeh, Nils Eldrup

  106-113

  • PDF

• Simulation of Biogenic Carbon Capture and Utilization Process Chain

  Kristian Tiiro, Markku Ohenoja, Outi Ruusunen, Riitta Keiski, Mika Ruusunen

  114-121

  • PDF

• Simulation model for an amine-based CO2 capture rig

  Soudeh Shamsiri, Neda Razi, Lars Erik Øi

  122-129

  • PDF

• Design of electrified fluidized bed calciner for direct capture of CO2 from cement raw meal

  Ladan Samaei, Lars-Andre Tokheim, Christoffer Moen

  130-137

  • PDF

• Performance Analysis of Advanced Wells in Reservoirs Using CO2 Enhanced Oil Recovery

  Prakash Bhattarai, Soheila Taghavi Hosnaroundi, Britt M.E. Moldestad

  138-145

  • PDF

• CO2 Enhanced Oil Recovery in Reservoirs with Advanced Wells: Simulations and Sensitivity Analysis

  Isu Uchechukwu Agha, Nora C.I. Furuvik, Soheila Taghavi

  146-153

  • PDF

• CO2 Storage and Evaluation of Important Parameters Affecting the CO2 Plume Distribution: Simulation and Sensitivity Analysis

  Mohammad Rakibul Hasan Chowdhury, Soheila Taghavi

  154-161

  • PDF

• Equilibrium analysis for methanation focusing on CO2 derived substitute natural gas

  Rakhi, Fabian Mauss

  162-167

  • PDF

• Modelling and simulation of CO2 capture through mineralization using CaO-containing by-products

  Amirhossein Ghazi, Lars-Andre Tokheim

  168-176

  • PDF

• Phase Transformations in Steelmaking Slags: A Thermodynamic Approach

  Tuomas Alatarvas, Rita Kallio, Eetu-Pekka Heikkinen, Qifeng Shu

  177-184

  • PDF

• Utilizing computational thermodynamics in characterization and classification of non-metallic inclusions in Ti-deoxidized steels

  Tuomas Alatarvas, Henri Tervo, Antti Kaijalainen, Qifeng Shu

  185-191

  • PDF

• Cellular automata model for austenite formation and grain growth during heating and holding above austenization temperature

  Aarne Pohjonen, Oskari Seppälä, Olli Väinölä, Jari Larkiola

  192-197

  • PDF

• Non-interacting lattice random walks for calculating diffusion controlled growth in solid state for dilute concentrations

  Aarne Pohjonen, Touko Puro, Assa Aravindh Sasikala Devi

  198-203

  • PDF

• On the Growth Kinetics of Lamellar and Blocky Austenite During Intercritical Annealing of Hot-Rolled Medium Manganese Steel: Thermodynamic and Diffusion-Controlled Transformation Simulations

  Roohallah Surki Aliabad, Saeed Sadeghpour, Pentti Karjalainen, Jukka Kömi, Vahid Javaheri

  204-210

  • PDF

• Effect of Slag Particle Diameter on the Re-melting of Ferrochrome Slag by means of Steelmaking Liquid Slag

  Reza Safavi Nick, Elisa Olson, Matti Aula, Severi Anttila, Esa Puukko

  211-216

  • PDF

• Optimizing Energy Consumption in Hydrogen Reduction of Iron Ore Pellet: Insights from HSC Chemistry Analysis

  Aidin Heidari, Timo Fabritius

  217-222

  • PDF

• Using an advanced simulation tool for successful conversion of reheating furnace to full oxyfuel operation

  Esin Iplik, Tomas Ekman, Kristofer Bölke, Otto Kankaanpää

  223-227

  • PDF

• Modelling and simulation of full-scale Sequential Batch Reactor (SBR) biological process operation using GPS-X

  Ida K.B. Stenberg, Robel S. Bekele, Gamunu L.S. Arachchige, Eshetu Janka

  274-280

  • PDF

• Optimizing Annual-Coupled Energy Systems with Sequential Time Dependencies in a Two-Stage Algorithm

  Marion Powilleit, Stefan Kirschbaum, Joram Wasserfall, Clemens Felsmann

  464-471

  • PDF

• Interoperability Challenges and Opportunities in Vehicle-in-the-loop Testings: Insights from NUVE Lab's Hybrid Setup

  Sarthak Acharya, Aparajita Tripathy, Juho Alatalo, Pekka Seppänen, Aki Lamponen, Jukka Säkkinen, Tero Päivärinta

  339-347

  • PDF

• A Novel Approach to Simulating the Performance of Autonomous Inflow Control Devices

  Ismail Hossain Rafi, Ali Moradi, Soheila Taghavi, Britt M. E. Moldestad

  392-397

  • PDF

• The Application and Advantages of a Generic Component-Based SI/CI Engine Model with VVA Compatibility

  Oskar Lind Jonsson, Lars Eriksson

  324-332

  • PDF

• Data Center Resource Usage Forecasting with Convolutional Recurrent Neural Networks

  Miika Malin, Jaakko Suutala

  448-455

  • PDF

• Green infrastructure for resilient urban design: the mapping and management of green roofs in Oslo

  Albert Likang Hu, Joanna Maria Badach, Arnab Chaudhuri

  257-265

  • PDF

• CARLA-based digital twin via ROS to create a hybrid testing environment for mobile robots

  Charlotte Stubenvoll, Tauno Tepsa, Tommi Kokko, Petri Hannula, Heli Väätäjä

  378-384

  • PDF

• Experimental and computational studies to investigate flow dynamics of Geldart A and Gledart B particles in a Circulating Fluidized Bed (CFB)

  Subham Kandel, Niroj Koirala, Nirajan Raut, Rajan Jaiswal, Sunil Prasad Lohani, Britt Margrethe Emilie Moldestad

  312-317

  • PDF

• Enhanced Anomaly Detection in Aero-Engines using Convolutional Transformers

  Mohammad Reza Babaei, Amare Desalegn Fentaye, Konstantinos Kyprianidis

  433-440

  • PDF

• Comparison of ML and ASM models for effluent nutrient estimation in the Hias Process

  Tiina M. Komulainen, Malik Baqeri, Katrine Marsteng Jansen, Arvind Keprate

  242-248

  • PDF

• Model Predictive Control for Integrated Photovoltaic (PV) and Electrolysers system

  Ali Reza Pirouzfar, Sambeet Mishra, Gaurav Mirlekar, Koteswara Rao Putta

  362-369

  • PDF

• GPU acceleration of average gradient method for solving partial differential equations

  Touko Puro, Aarne Pohjonen

  488-494

  • PDF

• Performance of direct air capture process in honeycomb channel configuration: A CFD study

  Majid Nejadseifi, Shervin Karimkashi, Tero Tynjälä, Payman Jalali

  297-303

  • PDF

• Evaluating Modelling Performance: Sensitivity Analysis of Data Volume in Industrial Batch Processes

  Simon Mählkvist, Thomas Helander, Konstantinos Kyprianidis

  415-424

  • PDF

• Computational Designing Approach for Medium Manganese Steels with Potential Better Hydrogen Embrittlement Resistance

  Mahmoud Elaraby, Mohammed Ali, Mamdouh Eissa, Jukka Kömi, Pentti Karjalainen, Vahid Javaheri

  228-235

  • PDF

• New Chemical Kinetics Mechanism for Simulation of Natural Gas/Hydrogen/Diesel multi-fuel combustion in Engines

  Mohammad Mahdi Salahi, Amin Mahmoudzadeh Andwari, Alireza Kakoee, Kian Golbaghi, Jari Hyvönen, Ayat Gharehghani, Maciej Mikulsky, Eric Lendormy

  348-355

  • PDF

• Numerical Methods for the Flow Fields; A Comparative Review

  Jamshid Moradi, Amin Mahmoudzadeh Andwari, Juho Könnö

  472-480

  • PDF

• Kinetic modelling and simulation of bioanode and biocathode in a bioelectrochemical cell for carbon dioxide reduction

  Vafa Ahmadi, Nabin Aryal

  281-288

  • PDF

• Integration of Dynamic Multiphase Flow and Reservoir Models for Improved Oil Recovery Simulation

  Charith Rajapaksha, Ismail Hossain Rafi, Nirajan Raut, Ali Moradi, Soheila Taghavi, Britt M. E. Moldestad

  398-406

  • PDF

• Modeling of a tire mounted energy harvester using an inertial and analytical tire deformation model

  Mikko Leinonen, Jaakko Palosaari, Jari Juuti

  333-338

  • PDF

• Evaluation of model uncertainty propagation in mineral process flowsheet designs

  Henri Välikangas, Markku Ohenoja, Stéphane Brochot, Manuel González Fernández, Jari Ruuska, Mika Ruusunen

  456-463

  • PDF

• Process simulation for biogas upgrading and biomethane recovery using biofilm-based reactors

  Vafa Ahmadi, Aryan Bhusal, Gamunu L Samarakoon Arachchige, Nabin Aryal

  266-273

  • PDF

• Identifiability and Kalman Filter Parameter Estimation Applied to Biomolecular Controller Motifs

  Eivind S. Haus, Malin Harr Overland, Damiano Rotondo, Kristian Thorsen, Tormod Drengstig

  385-391

  • PDF

• Impact of grid sensitivity and drag model along with the height of recirculating pipe on a cold flow circulating fluidized bed

  Subham Kandel, Nirajan Raut, Niroj Koirala, Sunil Prasad Lohani, Britt Margrethe Emilie Moldestad

  318-323

  • PDF

• A Deep-Unfolding Approach to RIS Phase Shift Optimization Via Transformer-Based Channel Prediction

  Ishan Rangajith Koralege, Arthur Sousa de Sena, Nurul Huda Mahmood, Farjam Karim, Dimuthu Lesthuruge, Samitha Gunarathne

  441-447

  • PDF

• Anaerobic digestion of biosolid pyrolysis liquid and hydrolyzed sludge - simulation with extended ADM1 model

  Thea Indrebø, Gudny Øyre Flatabø, Wenche Hennie Bergland, Gamunu L. Samarakoon Arachchige

  249-256

  • PDF

• Dynamic Reactor Modelling and Operability Analysis of Xylose Dehydration to Furfural Using an Extractive-reaction Process in an Agitated Cell Reactor

  Markku Ohenoja, Pekka Uusitalo, Fernando Russo Abegão, Abdullahi Adamu, Kamelia Boodhoo, Mika Ruusunen

  370-377

  • PDF

• Computational analysis of conjugate heat transfer in a 2D rectangular channel with mounted obstacles using lattice Boltzmann method

  Majid Nejadseifi, Shervin Karimkashi, Tero Tynjälä, Payman Jalali

  304-311

  • PDF

• Machine Learning -based Optimization of Biomass Drying Process: Application of Utilizing Data Center Excess Heat

  Henna Tiensuu, Virpi Leinonen, Jani Isokääntä, Jaakko Suutala

  425-432

  • PDF

• Physical simulation of heat-affected zones in a weld metal used with 500 MPa offshore steel

  Henri Tervo, Marcell Gáspár, Judit Kovács, Antti Kaijalainen, Vahid Javaheri, Johannes Sainio, Jukka Kömi

  236-241

  • PDF

• Driving force model for a real-time control concept of a hybrid heavy duty vehicle

  Jari Ruuska, Aki Sorsa, Isa Banagar, Perttu Niskanen, Amin Mahmoudzadeh Andwari, Mika Ruusunen, Emil Kurvinen, Juho Könnö

  356-361

  • PDF

• Nonlinearity analysis of variables for modelling and control

  Esko Juuso

  481-487

  • PDF

• Alternative fuels for the maritime industry and its impact on flue gas composition

  Mostafa Abedini, Mohammad Rakibul Hasan Chowdhury, Saman Pershen, Joachim Rød Knarrum, Ishmael Nii Nyarko Solomon, Pramod Ghimire, Nabin Aryal

  289-296

  • PDF

• Integration of Optimization Methods into Simulation Technology for Manufacturing via Warehouse Optimization

  Hannu Hakalahti, Alisa Ala-Huikku, Toni Luomanmäki, Juha Hirvonen

  407-414

  • PDF